Enter Part or Model Number for best results

(Where is my model number?)

Maytag Washer Won't Start


The 4 most common part(s) or condition(s) which contribute to the symptom Washer won't start are listed below. Check or test each item and watch any available videos. If you are still unable to solve the problem you may need to do additional research and troubleshooting. Remember, with our 365 Days. Period.® return policy you can return any part for any reason. So, go ahead and buy it to try it. No other parts retailer offers this unconditional return policy.

For the symptom you selected, these are the most common parts or causes, ordered by the likelihood of fixing the symptom.

Grid is 1 inch square
User Control and Display Board - Part # 1550105 Mfg Part # W10271608

User Control and Display Board

RepairClinic Item # 1550105

If the washer won't start, the user control and display board may be defective. Check for power to the washer first.

Grid is 1 inch square
Main Control Board - Part # 1550101 Mfg Part # W10271604

Main Control Board

RepairClinic Item # 1550101

If the washer won't start the main control board might be defective. This is not common. Check other parts and causes first.

Other Causes and Conditions

Incoming Power Problem

If the washer won't start check to see if there is power at the electrical outlet which the washer is plugged into. Plug a lamp or radio into the outlet to check it. If the outlet is dead, check the circuit breakers or fuses for the home.

Grid is 1 inch square
Power Cord - Part # 1200521 Mfg Part # 8183009

Power Cord

RepairClinic Item # 1200521

If the washer won't start, check to be sure there is power to the electrical outlet for the home. If that is OK, the power cord itself might be defective. This is rare. You can check the power cord with an Ohm meter for continuity.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!


Back to Symptom List