Enter Part or Model Number for best results

(Where is my model number?)

LG Washer Won't Spin or Agitate

WM2301HR

The 3 most common part(s) or condition(s) which contribute to the symptom Washer won't spin or agitate are listed below. Check or test each item and watch any available videos. If you are still unable to solve the problem you may need to do additional research and troubleshooting. Remember, with our 365 Days. Period.® return policy you can return any part for any reason. So, go ahead and buy it to try it. No other parts retailer offers this unconditional return policy.

For the symptom you selected, these are the most common parts or causes, ordered by the likelihood of fixing the symptom.

Grid is 1 inch square
Stator Assembly - Part # 1519490 Mfg Part # 4417EA1002K

Stator Assembly

RepairClinic Item # 1519490

If the washer won't spin or agitate the stator assembly might be burned out. The stator is essentially one half of a motor, it interacts with the tub by creating a strong electro-magnet. If the stator burns out the washer won't spin or agitate. Check the stator for continuity per the wiring diagram with the machine. This part is often misdiagnosed.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

$134.80

Grid is 1 inch square
Rotor Assembly - Part # 1519486 Mfg Part # 4413ER1003B

Rotor Assembly

RepairClinic Item # 1519486

If the washer won't spin or agitate the rotor assembly might be bad or damaged. The rotor is essentially one half of a motor, it interacts with the tub by creating a strong electro-magnet. If the rotor fails or is damaged the washer might not spin or agitate. Check the rotor for damaged magnets or other defects.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

$69.50

Grid is 1 inch square
Door or Lid Latch Assembly - Part # 1268254 Mfg Part # 6601ER1004C

Door or Lid Latch Assembly

RepairClinic Item # 1268254

If the washer won't spin or agitate the lid switch assembly might be defective. This is a very common problem. The lid switch assembly can fail either mechanically or electrically. Test any electrical switches with an Ohm meter for continuity. The switches should have continuity according to their design.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

$60.80

Back to Symptom List