GO
SEARCH:

Maytag Washer Door or Lid Won't Lock

MAH8700AWW

The 5 most common part(s) or condition(s) which cause the symptom Washer door or lid won't lock are listed below starting with the most likely. Check or test each item and watch any available videos.

Grid is 1 inch square
Door or Lid Latch Assembly - Part # 1094190 Mfg Part # 8182634

Door or Lid Latch Assembly

RepairClinic Item # 1094190

If the washer lid or door won't lock the lock and switch assembly might be defective. This is a very common problem. The lock and switch assembly can fail either mechanically or electrically. Test any electrical switches with an Ohm meter for continuity. The switches should have continuity according to their design.

$71.35

Order by 8:00 PM ET, this part ships TODAY!

Add to Cart

365 Day Return Policy

Grid is 1 inch square
Main Control Board - Part # 1185470 Mfg Part # 34001494

Main Control Board

RepairClinic Item # 1185470

If the washer door won't unlock the problem might be the main control board. This is not common. Normally the problem is with the lock mechanism.

Grid is 1 inch square
Main Control Board - Part # 1185471 Mfg Part # 34001495

Main Control Board

RepairClinic Item # 1185471

If the washer door won't unlock the problem might be the main control board. This is not common. Normally the problem is with the lock mechanism.

Picture Unavailable

Main Control Board

RepairClinic Item # 1185473

If the washer door won't unlock the problem might be the main control board. This is not common. Normally the problem is with the lock mechanism.

Grid is 1 inch square
Main Control Board - Part # 1185474 Mfg Part # 34001498

Main Control Board

RepairClinic Item # 1185474

If the washer door won't unlock the problem might be the main control board. This is not common. Normally the problem is with the lock mechanism.

Back to Symptom List