Enter Part or Model Number for best results

(Where is my model number?)

Whirlpool Washer Door or Lid Won't Lock

WFW9250WW00

The 2 most common part(s) or condition(s) which contribute to the symptom Washer door or lid won't lock are listed below. Check or test each item and watch any available videos. If you are still unable to solve the problem you may need to do additional research and troubleshooting. Remember, with our 365 Days. Period.® return policy you can return any part for any reason. So, go ahead and buy it to try it. No other parts retailer offers this unconditional return policy.

For the symptom you selected, these are the most common parts or causes, ordered by the likelihood of fixing the symptom.

Grid is 1 inch square
Door or Lid Latch Assembly - Part # 1515091 Mfg Part # W10253483

Door or Lid Latch Assembly

RepairClinic Item # 1515091

If the washer lid or door won't lock the lock and switch assembly might be defective. This is a very common problem. The lock and switch assembly can fail either mechanically or electrically. Test any electrical switches with an Ohm meter for continuity. The switches should have continuity according to their design.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

$69.45

Grid is 1 inch square
Main Control Board - Part # 2118235 Mfg Part # W10384843

Main Control Board

RepairClinic Item # 2118235

If the washer door won't unlock the problem might be the main control board. This is not common. Normally the problem is with the lock mechanism.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

$162.70

Back to Symptom List