GO
SEARCH:

Amana Washer Stops Mid Cycle

NAV5800AWW

The 3 most common part(s) or condition(s) which cause the symptom Washer stops mid cycle are listed below starting with the most likely. Check or test each item and watch any available videos.

Grid is 1 inch square
Lid Switch Assembly - Part # 1023603 Mfg Part # 27001095

Lid Switch Assembly

RepairClinic Item # 1023603

If the washer stops mid cycle the lid switch assembly might be defective. This is a very common problem. The lid switch assembly can fail either mechanically or electrically. Test any electrical switches with an Ohm meter for continuity. The switches should have continuity according to their design.

$27.50

Order by 8:00 PM ET, this part ships TODAY!

Add to Cart

365 Day Return Policy

Grid is 1 inch square
Water Inlet Valve - Part # 916299 Mfg Part # R0131578

Water Inlet Valve

RepairClinic Item # 916299

If the washer stops mid cycle the water inlet valve cold water side may have failed. Most washers have a cold water rinse and so if they can't fill with cold water they just sit indefinitely waiting for the cold water to enter. If there is cold water to the water inlet valve and the cold water works in other parts of the cycle - or to make warm water - the valve is not the problem.

$54.40

Order by 8:00 PM ET, this part ships TODAY!

Add to Cart

365 Day Return Policy

Grid is 1 inch square
Timer - Part # 1023597 Mfg Part # 27001088

Timer

RepairClinic Item # 1023597

If the washer stops mid cycle the timer might be defective. This part is often misdiagnosed, check other components before replacing this timer.

Back to Symptom List