Enter Part or Model Number for best results

(Where is my model number?)

LG Washer Stops Mid Cycle

WM2301HR

The 3 most common part(s) or condition(s) which contribute to the symptom Washer stops mid cycle are listed below. Check or test each item and watch any available videos. If you are still unable to solve the problem you may need to do additional research and troubleshooting. Remember, with our 365 Days. Period.® return policy you can return any part for any reason. So, go ahead and buy it to try it. No other parts retailer offers this unconditional return policy.

For the symptom you selected, these are the most common parts or causes, ordered by the likelihood of fixing the symptom.

Grid is 1 inch square
Water Inlet Valve - Part # 1268123 Mfg Part # 5220FR2006H

Water Inlet Valve

RepairClinic Item # 1268123

If the washer stops mid cycle the water inlet valve cold water side may have failed. Most washers have a cold water rinse and so if they can't fill with cold water they just sit indefinitely waiting for the cold water to enter. If there is cold water to the water inlet valve and the cold water works in other parts of the cycle - or to make warm water - the valve is not the problem.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

$14.80

Grid is 1 inch square
Water Inlet Valve - Part # 1268130 Mfg Part # 5221ER1003A

Water Inlet Valve

RepairClinic Item # 1268130

If the washer stops mid cycle the water inlet valve cold water side may have failed. Most washers have a cold water rinse and so if they can't fill with cold water they just sit indefinitely waiting for the cold water to enter. If there is cold water to the water inlet valve and the cold water works in other parts of the cycle - or to make warm water - the valve is not the problem.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

$37.80

Grid is 1 inch square
Main Control Board - Part # 2667412 Mfg Part # EBR32268019

Main Control Board

RepairClinic Item # 2667412

If the washer stops mid-cycle the main control board might be defective. This is not common. Check other causes first such as the lid or door switch and other components.

Place your order by 8:00 PM ET and this item will ship out today - or it's FREE!

$144.25

Back to Symptom List