Roper Heating Element Parts

Dryer heating element. If your dryer does not heat, enter your model number into our Repair Help Section as this part is not the most common cause.

Manufacturer Number 279838

Normally, if you remove the old element a defective part will have a physical break in it. It can also be tested using a multimeter.See our Repair Help section for additional information

Oven bake heating element with push-on wire terminals

Manufacturer Number WB44K5012

Watch our “Part Testing” video to determine if the bake or broil element has burned out and needs to be replaced.

Heating element, 240 volts

Manufacturer Number 4391960

Watch our “Part Testing” video to determine if the dryer heating element has burned out and needs to be replaced.

Bake element, 240 volts

Manufacturer Number 308180

Watch our “Part Testing” video to determine if the bake or broil element has burned out and needs to be replaced.

Surface burner replacement kit, 2 eight inch elements, 2 six inch elements, four receptacles and related hardware.

Manufacturer Number 4392061

Watch our “Part Testing” video to determine if the surface coil element has burned out and needs to be replaced.

Oven bake heating element. Push-on wire terminals. Includes feet for sitting on bottom of oven floor, and mounting plate for attaching to back wall of oven.

Manufacturer Number 77001094

Watch our “Part Testing” video to determine if the bake or broil element has burned out and needs to be replaced.

Heating element assembly

Manufacturer Number W10134009

Watch our “Part Testing” video to determine if the dishwasher heating element has burned out and needs to be replaced.

8" diameter plug-in surface burner with looped terminal ends, 5 turn, 2600 watt

Manufacturer Number 660533

Watch our “Part Testing” video to determine if the surface coil element has burned out and needs to be replaced.

Oven bake heating element with push-on wire terminals

Manufacturer Number 326791

Watch our “Part Testing” video to determine if the bake or broil element has burned out and needs to be replaced.

8" diameter surface burner with looped terminal ends

Manufacturer Number WB30X253

Watch our “Part Testing” video to determine if the surface coil element has burned out and needs to be replaced.

Oven bake heating element with push-on wire terminals

Manufacturer Number 9758519

Watch our “Part Testing” video to determine if the bake or broil element has burned out and needs to be replaced.

Bake element

Manufacturer Number W10308477

Watch our “Part Testing” video to determine if the bake or broil element has burned out and needs to be replaced.

Oven bake heating element with push-on terminals

Manufacturer Number 326793

Watch our “Part Testing” video to determine if the bake or broil element has burned out and needs to be replaced.

6 Inch diameter surface burner with looped terminal ends

Manufacturer Number WB30X254

Watch our “Part Testing” video to determine if the surface coil element has burned out and needs to be replaced.