Washing Machine Parts

Drive motor coupler. New style with metal sleeves for added strength. This version replaces all previous motor coupler styles and versions. For direct drive washing machines.

Manufacturer Number 285753A

Common symptom of failed coupler is washer will fill, not agitate or spin but will drain the water from the tub.

Gas burner valve solenoids. Kit contains both the two wire and three wire solenoids. One solenoid is the primary and one is the safety. Both have to operate for the gas valve to open. Usually, one of them burns out but you should always replace them as a set.

Manufacturer Number 279834

These often fail intermittently, making diagnosis difficult. To test, watch the burner assembly while the dryer is heating. If the igniter glows for a while and then shuts off without the gas turning on, it usually means one of these coils is bad.

Washing machine agitator repair kit with a medium length cam (there are other kits available for different models). This kit should be used when the top part of the agitator is not moving properly but the bottom part is.

Manufacturer Number 285811

Drain pump for belt-less direct-drive washer, one large port, one small port.

Manufacturer Number 3363394

Mounts directly to the motor with two clips. A leaking pump may cause a small puddle in the front of the washer.

Washing machine agitator directional cogs, also known as "dog ears", 4 per package

Manufacturer Number 80040

Selector switch knob, white with chrome accent ring and black line pointer. "D" shaped push-on shaft.

Manufacturer Number WH01X10460

Drain pump and motor assembly

Manufacturer Number 4681EA2001T

Shipping bolt assembly. 6-1/4 inches long. Install before moving washing machine, remove before use.

Manufacturer Number 4011FR3159D

Lid switch assembly, Washing Machine.

Manufacturer Number 3949247

If the washer fills and agitates, but does not drain or spin then the lid switch has likely failed. Watch our “Part Testing” video to determine if the switch has failed and needs to be replaced.

Spanner nut wrench for MOST Whirlpool/Kenmore, General Electric & Maytag inner tub lock nuts

Manufacturer Number TB123A

Shipping bolt assembly. 4-3/4 inches long. Install before moving washing machine, remove before use.

Manufacturer Number 4011FR3159E

Timer knob, white

Manufacturer Number WH01X10310

Door strike/catch, Front Load Washer

Manufacturer Number 131763310

Washing Machine agitator repair kit. *Short cam.

Manufacturer Number 285809

The teeth on the dog ears often wear out and cause the top of the agitator to not work properly.

Washing machine water inlet valve kit, with bracket

Manufacturer Number 285805

A long or slow fill cycle is often due to a restricted water valve. The valve should never be disassembled and cleaned, only replaced.

Door switch assembly

Manufacturer Number 3406107

Door lock and switch assembly. A select few washers will require a new wire harness kit and door strike for this item to work per the manufacturer. If assembly does not wire directly in see Related Items for harness and strike.

Manufacturer Number 131763202

A select few washers will require a new wire harness kit and door strike for this item to work per the manufacturer. If assembly does not wire directly in see Related Items for harness and strike.

Washing machine clutch assembly with hardware. *Blue spring for large capacity washers, black for compacts.

Manufacturer Number 285785

A worn clutch often causes a slower spin speed which leaves the clothes soaked after the cycle.

Suspension spring

Manufacturer Number 63907

A bad or broken suspension spring causes tub balancing problems during the spin cycle.

Tub dampening strap for washing machine

Manufacturer Number WH1X2727

Lid switch assembly

Manufacturer Number 3949238

Watch our “Part Testing” video to determine if the switch has failed and needs to be replaced.

Knob for selector switches on washing machines and dryers. "D" shaft. Includes shaft spring to hold knob in place.

Manufacturer Number 134844410

Washer/dryer selector switch knob, white w/clip

Manufacturer Number WH1X2721

Door strike and latch, white

Manufacturer Number 134456600

Belt tension pulley

Manufacturer Number 691366

Plastic leveling leg

Manufacturer Number 49621

Washing machine agitator drive bell. Connects transmission drive shaft to the agitator base.

Manufacturer Number WH49X10042

Drain hose with bellows for flexibility during wash and spin cycle. Use cleanout to remove debris.

Manufacturer Number 4738ER1002A

Sensor assembly-HALL (motor) sensor

Manufacturer Number 6501KW2002A

Universal door catch kit

Manufacturer Number 279570

Door handle

Manufacturer Number 8181846

Front bellow seal

Manufacturer Number 8182119

Drain pump

Manufacturer Number W10536347

Washing machine corrugated drain hose, 4-1/2 feet

Manufacturer Number WH41X10096

Water inlet valve, HOT

Manufacturer Number 5220FR2006H

Water inlet valve assembly. Three solenoid valves. Standard hose fitting inlet. 2 of the outlets face 45 degrees to the right, one outlet faces 45 degrees to the left.

Manufacturer Number 5221ER1003A

V-Belt, washer drive

Manufacturer Number 134511600

Knob and clip assembly

Manufacturer Number WH01X10462

Inlet valve filter screen

Manufacturer Number AGM73269501

Dryer lint filter, white handled lint screen for most large and extra capacity dryers, measures 19 3/8" x 7 1/8".

Manufacturer Number 8557882

Pump and motor assembly with mounting bracket

Manufacturer Number WH23X10013

Shock absorber kit

Manufacturer Number 5304485917

Adjustable leg with rubber foot

Manufacturer Number W10001130

Drive block for inner tub

Manufacturer Number 389140

A worn drive block will cause a slow spin condition which leaves the clothes soaked at the end of the cycle. If worn, you often hear a loud knocking noise at the beginning of the spin cycle.

Drive belt

Manufacturer Number WH01X10302

The new belt will seem too small during installation. However, it will stretch and we offer a belt tool to help.

Spring, tub counterbalance

Manufacturer Number W10250667

This spring offsets the weight of the motor on the front of the washer. If broke, the tub will lean forward and the tub will be off balance during the spin cycle.

Lid switch assembly

Manufacturer Number 8318084

Watch our “Part Testing” video to determine if the switch has failed and needs to be replaced.

Timer dial skirt assembly, white with black arrow pointer

Manufacturer Number WH11X10049

Metal knob insert

Manufacturer Number WE1X980