Icemaker water fill tube with compression nut. Approximately 9 1/2 inches long. Can be cut to match the length of the original tube.
Refrigerator icemaker control module and motor assembly. Located under the white cover of icemaker and controls ice ejector bar, heater and water inlet valve for the icemaker. If the icemaker is not making ice or making too much ice the model may be defective.
1/4 inch plastic water line kit, approximately 72 inches. Tubing will need to be cut to match existing length.
Ice maker module front cover
Screw 1/4" hex head, 10-12 x 1/2
Bearing and cup assembly for icemaker
Icemaker shutoff arm
Ice maker bottom mounting bracket
Thermostat for modular icemaker, with new clips
Inserts for 1/4 inch plastic tubing (package of 4)
Nut, 1/4" plastic water line
Gasket, water inlet hose
Ice stripper for icemaker
Screw, 8-32 X 1-1/4