Washer drive motor coupler. New style with metal sleeves for added strength. This version replaces all previous motor coupler styles and versions. For direct drive washing machines. Common symptom of failed coupler is washer will fill, not agitate or spin but will drain the water from the tub.
Washing machine clutch assembly with hardware. *Blue spring for large capacity washers, black for compacts. A worn clutch often causes a slower spin speed which leaves the clothes soaked after the cycle.
Transmission (gearbox) for direct-drive washing machines. If the gears inside the transmission are worn out, the washer may not spin.
Lid switch assembly for direct drive washer. The lid switch assembly prevents the washer from spinning when the lid is open. If the lid switch assembly fails, the washer will not spin.
Inner basket drive kit
Washer clutch band and & lining kit. The clutch makes the connection between the transmission and the inner tub. If the clutch is worn out, it may prevent the tub from spinning.
Dryer belt, length 79 1/8”, width 1/4”, characteristics, 4 ridges, flat
Spin tube bearing
Centerpost bearing and seal kit for direct drive washer. The brake removal tool is needed for easy removal of your original bearing. Please see related items below.
Thrust ring, spin tube
Center post bearing, upper. Special bearing tool for install no longer available from the manufacturer.
Gearcase assembly for direct drive washer
Agitator ball bearing kit inside gearcase
Dryer drum drive motor