Lawn mower discharge chute. Installing this chute will keep the mulch cover open to discharge the clippings out the side of the mower.
MTD Spark Plug. The spark plug ignites the fuel and air mixture in the cylinder to power the engine. If the spark plug is burnt, fouled or damaged the engine may not start or may run rough.
Grass bag frame. If the grass bag is dragging on the ground, or the frame will not stay in position it may be broken or bent and will need to be replaced.
21" Lawn mower mulching blade with star. MTD Genuine Factory Part.
Fuel bowl gasket
Hinged mulch plug (or cover) for lawn mower. Note: Mounting screw is not pre threadded. You need to use the original self tapping screw or purchase a new screw in the recommended parts below.
Lower handle bar. There are two sets of holes in the bar. The one closest to the flat end is used for shipping. You will use the mounting hole furthest away for normal use.
Rear trail shield
MTD flange lock-nut, 1/4-20.
Total length is 53 inches. Conduit length is 40 inches. MTD has updated this part. It is now manufactured with a hook on the upper end. This replaces the old clamp style. If the control cable is broken, the lawn mower's self-propel feature won't work.
Blade retaining bolt