Lawn mower discharge chute. Installing this chute will keep the mulch cover open to discharge the clippings out the side of the mower.
Lawn mower adjustable upper handle.
MTD Spark Plug. The spark plug ignites the fuel and air mixture in the cylinder to power the engine. If the spark plug is burnt, fouled or damaged the engine may not start or may run rough.
Grass bag frame. If the grass bag is dragging on the ground, or the frame will not stay in position it may be broken or bent and will need to be replaced.
21" Lawn mower mulching blade with star. MTD Genuine Factory Part.
Fuel bowl gasket
Hinged mulch plug (or cover) for lawn mower. Note: Mounting screw is not pre threadded. You need to use the original self tapping screw or purchase a new screw in the recommended parts below.
Lower handle bar. There are two sets of holes in the bar. The one closest to the flat end is used for shipping. You will use the mounting hole furthest away for normal use.
Rear axle assembly
Rear trail shield
Front axle assembly
Lawn mower blade adapter. 25mm. If the lawn mower's blade isn't engaging properly, the blade adapter may be stripped. If the blade adapter is stripped, replace it.