Poulan Pro Chainsaw Model PPB4218/TYPE 2 Parts
Featured parts for Poulan Pro Chainsaw
Husqvarna fuel filter. If the fuel filter is clogged, it will restrict the flow of fuel to the carburetor. As a result, the engine may not start.
Fuel line (Large). The fuel line allows fuel to travel from the fuel tank to the carburetor and from the primer bulb to the fuel system.
Champion Spark Plug (RCJ7Y). The spark plug ignites the fuel and air mixture in the engine's cylinder to power the engine. If the spark plug is has fouled (if the tip of the spark plug is burnt or damaged), the engine may not start or may run rough.
Primer bulb (or purge bulb) assembly. The primer bulb draws fuel into the carburetor to make the engine easier to start. The short port on the primer bulb is the inlet. The longer port is the outlet back to the fuel tank.
Chainsaw carburetor. If the carburetor is clogged, the engine won't get enough fuel. As a result, the engine may not start or may run rough. The carburetor can often be cleaned or rebuilt, but sometimes it may need to be replaced.
Chainsaw clutch drum assembly. When the engine's speed increases, the clutch engages the clutch drum and gear to drive the chain. If the chain isn't turning, the clutch drum may be defective.
Chainsaw fuel cap with retainer
Husqvarna chainsaw air filter. If the air filter is clogged or dirty, the engine may not start or may run rough.
Two cycle engine fuel line fitting.
Starter Spring * This is the spring for the retraction of the rope**Not for the easy start system***
Rope for pull starter
Gasket kit
Husqvarna bar mounting nut.
E-Ring kit. Contains clutch washer and retaining clip.
Start doing it yourself with the confidence that comes with 100+ years of experience. We've got millions of parts, hundreds of brands, and thousands of step-by-step videos— everything you need to find it, fix it and finish the job right.
