Ice maker assembly with cover and wire harness. Makes 8 radius ice cubes. If the mold where cubes are made is flaking or corroded it is time for a new ice maker assembly. *Use model number to find correct icemaker.
Compressor run capacitor, 120 volts 15 mfd.
Freezer door gasket. If this gasket is worn out, cold air will leak out of the freezer, forcing the freezer to work harder to cool down. As a result, the freezer may run longer than it should, or frost may accumulate inside of the freezer.
Evaporator (cooling coil) fan motor assembly with wire harness, 115 volts. *Per manufacturer screw holes in motor are not threaded from the factory, use old screws. See Related Items for self tapping screw. When the evaporator fan motor fails, it often generates a lot of noise in the freezer area.
Refrigerator/freezer defrost thermostat located on the evaporator coil
Refrigerator or freezer water inlet valve. This water inlet valve supplies water to your refrigerator's ice and water dispenser. If the water dispenser or ice maker isn't working, the water inlet valve might be defective.
Freezer or refrigerator door key. This key is shaped like a plus sign.
Evaporator/freezer fan blade
Replacement icemaker kit. Wire harness has four round female connectors. Includes adaptor that converts harness to three round female & one round male connectors. Makes 8 radius ice cubes.
*Use model number to find correct icemaker.
Defrost heater assembly
Screw,no.10-16 x 1/2
Compact icemaker drive gear for ejector blades
Container, ice bin