21" Lawn mower mulching blade with star. MTD Genuine Factory Part.
Lawn mower discharge chute. Installing this chute will keep the mulch cover open to discharge the clippings out the side of the mower.
Grass bag frame. If the grass bag is dragging on the ground, or the frame will not stay in position it may be broken or bent and will need to be replaced.
Hinged mulch plug (or cover) for lawn mower. Note: Mounting screw is not pre threadded. You need to use the original self tapping screw or purchase a new screw in the recommended parts below.
Brake control cable 37.58"
Lawn mower blade adapter. 25mm. If the lawn mower's blade isn't engaging properly, the blade adapter may be stripped. If the blade adapter is stripped, replace it.
Lower handle bar. There are two sets of holes in the bar. The one closest to the flat end is used for shipping. You will use the mounting hole furthest away for normal use.
Genuine MTD 942-0741X Extreme blades features more cutting surface than standard blades. Creates finer mulch and when bagging, leaves fewer clippings on the turf.
Rear trail shield
Blade retaining bolt
MTD flange lock-nut, 1/4-20.
Grass bag frame
Front axle assembly