Affresh® Washing machine cleaner. This cleaner removes and prevents odor-causing residue in all brands of washers. To use, add one tablet to washer with no clothes and select hot water.
- Septic safe
- More effective than bleach.
- Three tablets per package.
Washing machine tub suspension rod kit,. Set of 4 rods, 4 suspension balls and 4 bushings. The suspension rods help to dampen the movement of the washer tub. If one or more of the suspension rods are broken, the washer will vibrate or shake.
Drive Clutch Kit. This kit has 6 parts; a spring, housing, cam ring, basket drive gear, pulley, and nut. The pulley is driven by the drive belt and the splutch works with the mode shift actuator to operate the washplate and spin the inner basket. A worn splutch can cause spin or washplate problems.
Washer main drive belt. This belt is located under the washing machine and is used to drive the splutch pulley. It goes around the motor & splutch pulleys. Worn or broken drive belt can cause spin or washplate problems.
Washing machine mode shift actuator. *Updated by the manufacturer, does not look like original part. Actuator serves several functions. It has a synchronous motor that shifts the splutch cam ring and monitors the position of the splutch. Also has transmission speed/position optical sensor
Includes latch assembly, one white and one gray lid lock bezel. Lid must be closed for washer to fill, wash, drain, or spin. If the machine is not advancing into the cycle or is displaying a lid lock fault this may be the cause of the issue.
White touch-up paint. .6 oz.
Spanner nut wrench for many Whirlpool, Kenmore, General Electric & Maytag inner tub lock (spanner) nuts
Tub centering spring. Comes (2) per package. Helps keep tub balanced and centered with the main top.
Washing machine drain hose kit. Includes clamp. 4 feet long
Affresh® Washing Machine Tablets. Value pack of 6 tablets. Affresh Washer Cleaner tablets are designed to penetrate, dissolve and remove odor-causing residue that can occur in all washing machines.
Washing machine drain pump. If the washer does not drain then the drain pump may be clogged, damaged, or defective.
Residential Washer Hoses- Fits most major washer brands.
• Provides hot & cold water to the washer
• (2) 4 Ft. hoses for hot & cold water
• (4) Built-in O-rings
• Anti-leak crimp
It is recommended to replace washing machine inlet hoses after 5 years of use to reduce the risk of hose failure.
Spray paint, white, 12 ounces
White washer lid strike assembly. The strike is what the lid lock hooks onto to lock the washing machine lid. If the washing machine is not advancing into the cycle or is displaying a lid lock fault this may be the cause of the issue.