Oven bake element. The terminals are male quarter inch spade connectors. The wires push onto the heating elements connectors. If the oven does not bake then the element could have burned out.
Surface element control switch for the large surface element. If the surface element is not heating the element can be tested to determine if it is defective. If not, the switch is likely causing the problem.
Oven temperature sensor
Oven bottom panel. Porcelain coated steel.
Surface element control switch for the small surface element
Oven anti-tip bracket kit. This bracket helps to secure the range and prevent it from tipping over.
Oven light bulb
Dual surface element, 9 inches/ 6 inches. 1200/2500 watt
Range/stove radiant surface element for 6-inch burner. 1200 watts. If the surface element is not heating, use a multimeter to test the element for continuity. If the element has continuity, the surface element switch is likely defective.
Terminal block kit for electric range and dryer power cords.
Electronic oven control board. The control board displays the time of day and controls the oven bake, broil, and self-cleaning functions. If your oven won't heat, test your oven's heating elements and confirm that the oven is receiving power before replacing the control board.
Oven bottom insulation
Radiant surface element