Husqvarna fuel filter. If the fuel filter is clogged, it will restrict the flow of fuel to the carburetor. As a result, the engine may not start.
Fuel Line (Small)- 9/64 (.140) inch OD - (.080) inch ID, W/ Installation instructions.
Fuel line (Large). The fuel line allows fuel to travel from the fuel tank to the carburetor and from the primer bulb to the fuel system.
Primer bulb (or purge bulb) assembly. The primer bulb draws fuel into the carburetor to make the engine easier to start. The short port on the primer bulb is the inlet. The longer port is the outlet back to the fuel tank.
Husqvarna chainsaw air filter. If the air filter is clogged or dirty, the engine may not start or may run rough.
Chainsaw carburetor. If the carburetor is clogged, the engine won't get enough fuel. As a result, the engine may not start or may run rough. The carburetor can often be cleaned or rebuilt, but sometimes it may need to be replaced.
Two cycle engine fuel line fitting.
Chainsaw clutch drum assembly. When the engine's speed increases, the clutch engages the clutch drum and gear to drive the chain. If the chain isn't turning, the clutch drum may be defective.
Chainsaw fuel cap with retainer
Starter Spring * This is the spring for the retraction of the rope**Not for the easy start system***
Rope for pull starter
Oil cap assembly w/retainer
E-Ring kit. Contains clutch washer and retaining clip.