Flame rollout limit switch, re-settable. opens at 250f
Carrier furnace igniter. The igniter gets very hot and glows bright orange to light the gas burner. If the igniter is cracked or defective, the furnace won’t heat.
Inducer motor assembly. This assembly is designed for 40, 60, 80, and 100 thousand BTU model furnaces. Your furnace's BTU rating may be listed on the model number tag. You can also determine the rating from your model number—the 3-digit number preceding the hyphen indicates the BTU rating.
Gas burner tube
Single, Oval, 370 Volts, 5 Microfarads
Gas furnace flame sensor
Furnace control board.
Furnace blower motor. This single-phase motor has the following specifications:
Full-Load Amperage: 5.2
Shaft Length: 3.9”
Pressure switch, SPST 1.65"wc, 1/4 barbed connection
Inducer cooling fan kit
Grommet, motor mounting bracket. Sold as a single grommet but we suggest purchasing three since there are 3 holding the motor in place, and it’s a good practice to change all of them while the assembly is taken apart.
9" inducer blower wheel 5/16" hub size (Plastic).