Furnace draft inducer mounting grommet.
Furnace draft inducer motor cooling fan blade and clip. You may have to cut the old clip off to remove the fan blade.
Nitride Hot Surface Furnace Ignitor
Inducer fan wheel
Flame rollout limit switch re-settable 350F
Gasket, draft inducer housing
Draft inducer motor
Limit switch non-resettable 101-200F
Furnace blower wheel. 12" X 11.93" 1/2" Bore. The blower wheel blows air out of the furnace and through the house. The blower wheel is attached to the blower motor shaft with a set screw. If the set screw is loose, the blower wheel will wobble on the motor shaft and be noisy as it turns.
Carrier furnace circuit board. This circuit board regulates the supply of power to the furnace components.
Limit switch 125-165F
Lmit switch 140-180F
Furnace draft inducer motor kit. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.