Flame rollout limit switch, re-settable. opens at 250f
Nitride Hot Surface Furnace Ignitor
Carrier furnace igniter. The igniter gets very hot and glows bright orange to light the gas burner. If the igniter is cracked or defective, the furnace won’t heat.
Gas burner tube
Inducer motor assembly. This assembly is designed for 40, 60, 80, and 100 thousand BTU model furnaces. Your furnace's BTU rating may be listed on the model number tag. You can also determine the rating from your model number—the 3-digit number preceding the hyphen indicates the BTU rating.
Single run capacitor 440V 7.5 mfd
Gas furnace flame sensor
Carrier furnace circuit board. This circuit board regulates the supply of power to the furnace components.
Furnace blower motor. This single-phase motor has the following specifications:
Horsepower: 1/3
Voltage: 115
Full-Load Amperage: 5.2
Hertz: 60
RPM: 1075
Speeds: 4
Rotation: Counterclockwise
Frame: 48
Enclosure: Open
Shaft Length: 3.9”
Condensate trap
Pressure switch, SPST 1.65"wc, 1/4 barbed connection
Inducer cooling fan kit
Inducer blower wheel, 9 inch diameter; 5/16" hub size, plastic