Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.
Stainless steel burner
Hot surface furnace ignitor with plug on connector
Draft Inducer Motor, 1 stage
HSI control module with four wire leads
Gas Valve Assembly
Please see related items for gas valve adapter kit
Transformer; 115v pri, 24v sec., 60hz, 35va, foot mount
Blower Wheel 11.7 by 10.6 inches.
Door switch, 21 amps, 125/250 vac
1/2HP 115Volts 60Hz 9.35 amp 1075 RPM's 4 Speed Open Enclosure 48Y Frame Single Phase CCW 3" Shaft
Resilient ring, 2 required
Brass orifice spud, drill #45
Air Filter, 25" x 24" x 1". Permanent
Switch;thermal limit, open at 155, close at 125 deg
Wire;12 pin wire harness assembly