Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.
Stainless steel burner
Thermal limit switch, open at 180 degrees, close at 150 degrees
Hot surface furnace ignitor with plug on connector
HSI control module with four wire leads
Gas Valve Assembly
Please see related items for gas valve adapter kit
Transformer; 115v pri, 24v sec., 60hz, 35va, foot mount
Transition receptacle, includes four mounting screws
Door switch, 21 amps, 125/250 vac
Draft inducer motor, one stage with shaded pole motor *Note: All models use this part with the exception of: *UX/DX100A, UX/DX100C, UX/DX1C100, UX1D100, UX/DX120A, UX/DX120C. These select models use item 2458691.
Capacitor; 440 vac oval motor run, 15 mfd
10 in diameter x 10 in width. .50 BC. Clockwise rotation
1/2HP 115Volts 60Hz 9.35 amp 1075 RPM's 4 Speed Open Enclosure 48Y Frame Single Phase CCW 3" Shaft
Resilient ring, 2 required
Air filter, 25 X 20 X 1 inch