Furnace flame sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the flame sensor is defective, the furnace may not heat.
Stainless steel burner
HSI control module with four wire leads
Draft Inducer Motor, 1 stage
Fan capacitor, 440 volts, 5.0 MFD
Gas Valve Assembly
Please see related items for gas valve adapter kit
Hot surface furnace ignitor with plug on connector
Transformer; 115v pri, 24v sec., 60hz, 35va, foot mount
Filter; permanent, 25 x 16.5 x 1in.
Switch;thermal limit, open at 260, close at 230 deg
Door switch, 21 amps, 125/250 vac
Gasket; venter assembly
Resilient ring, 2 required
Brass orifice spud, drill #45
Wheel; blower, 10in. dia x 7in. width, .50in. bore,