40 Watt frosted appliance light bulb.
Oven ignitor, this item is also referred to as a glow bar. The igniter is mounted vertically on the burner tube. If the oven does not heat check if the igniter is glowing, if so then there is a good chance the igniter is weak and will need repalcement.
Grate Bumper. Adhesive required to hold foot in place. See required parts below.
Range leveling leg, black plastic. This leg may be shorter than the original but is the factory replacement. Longer leg is not available.
Stove top spark electrode for burner.
Oven sensor kit, short 3" long
Anti-tip bracket for freestanding range
Sealed gas burner head assembly, 1 BLACK burner head with spark electrode. Rotate assembly counter clockwise to release burner from the main top. *No gasket seal required per manufacturer.
Screw 8 X 1/2
Screw, round head machine thread, 10-24 threads x 1/4" long.