Washing machine shock absorber. This shock absorber prevents the washer from vibrating by absorbing the movements of the washer tub.
Washer door lock latch assembly. The door lock secures the washer door shut during operation. Once the washing machine door is closed, the washer can begin operating. If the door lock is defective, the washer door will not latch properly.
Washing machine drain pump motor assembly. If the washer does not drain the drain pump may be clogged. If no clog is found the motor's impeller could be damaged or the motor itself could be defective.
Washer hex bolt for inner tub flange and shaft assembly.
Shock damper
Wire retaining clamp for boot seal
5-foot-long rubber fill hose for washing machines. Used for hot or cold water.
Door glass
Washer inner tub flange and shaft assembly. Be aware the support may appear to have cracks but that is a normal part of the casting process per the manufacturer.
Water temp thermistor
Shipping bolt
Door strike
Drain hose assembly. 80 inches long with 90 degree connection at pump.
Water level pressure switch
Door boot gasket (or boot seal). If the washer is leaking, the door boot may have a tear in it. Overloading the washer is the most common cause for a torn door boot.