Washer tub dampening strap. If the washing machine tub is off-balance, then one or more of these straps may have broken.
Washing machine agitator assembly.
Drain pump assembly
Selector knob, white
Washing machine corrugated drain hose, 4-1/2 feet. If the drain hose is cracked, it will leak water during the washer's drain cycle.
Suspension rod and spring assembly, Blue
Washing machine main tub bearing. Located at bottom of outer tub. The tub bearing helps to keep the inner tub spinning smoothly.
Washing machine main tub seal. If the washer leaks around the center shaft then the main tub seal is likely defective.
Lid switch and wire harness assembly. The lid switch assembly prevents the washer from spinning if the lid is open. If the washer won't spin, but will agitate, the lid switch might be defective.
Water inlet valve
Washing machine timer. The timer controls all the cycles that the washer goes through during each load.
Washing machine agitator drive bell (also called the coupler). The drive bell connects the transmission drive shaft to the agitator base.
Suspension rod and spring assembly, Red
Split ring bushing at outer tub