Heil Furnace Model RCC-HEIL-FURNACE Parts

Furnace draft inducer assembly. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.

Flame rollout switch 300F resetable

Blower vent 80+ 1-stg jakel kt

Furnace burner igniter and flame sensor assembly. This is a 24 volt igniter.

Hot surface furnace igniter kit.
If the electrical connnector on your old part is different than the new igniter, it can be cut off and spliced onto the new igniter wires using the provided wire nuts.

Single run capacitor, oval, 370 volts, 10 microfarads

Switch vent press 90+ single port

Tube silicone 24" x 1/4"id

Door Retaining Screw

Blower Wheel 11"x10" CW 1/2"Bore

Limit Switch

Transformer 115volt primary 24 volt secondary 40va

Mtr blr 1/115 1/2 sk

Blower vent 80+ 1-stg jakel kt

Gas burner assembly, 3 section