Furnace draft inducer assembly. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.
Flame rollout switch 300F resetable
Blower vent 80+ 1-stg jakel kt
Hot surface furnace igniter kit.
If the electrical connnector on your old part is different than the new igniter, it can be cut off and spliced onto the new igniter wires using the provided wire nuts.
Furnace burner igniter and flame sensor assembly. This is a 24 volt igniter.
Single run capacitor, oval, 370 volts, 10 microfarads
Door Retaining Screw
Blower Wheel 11"x10" CW 1/2"Bore
Tube silicone 24" x 1/4"id
Transformer 115volt primary 24 volt secondary 40va
Burner pilot with spark igniter
Blower motor 1/115 1/2 sk
Gas burner assembly, 3 section