Furnace draft inducer mounting grommet. This grommet helps isolate the blower assembly from the furnace to reduce noise.
Gas burner tube
Grommet, motor mounting bracket. Sold as a single grommet but we suggest purchasing three since there are 3 holding the motor in place, and it’s a good practice to change all of them while the assembly is taken apart.
High limit thermostat, 180 degrees Fahrenheit
High efficiency furnace board
Furnace draft inducer motor. The draft inducer motor draws air into the burner and exhausts it out the flue. If the draft inducer motor is defective, the furnace may not heat.
Inducer motor fan blower wheel. 5.6 x 1.55 in, bore 5/16 in, CW hub end
.44 Orifice. Bag of 7. Natural Gas. *Should be installed by a certified Carrier repairperson.
Inducer control board
Motor mounting bracket without grommet
Spring Conversion kit, L.P to Natural. *Does not include orifices also needed. *Should be installed by a certified repairperson.
Spark electrode pilot igniter