Refrigerator crisper drawer assembly. Clear plastic with humidity control & white handle trim .
Refrigerator icemaker. This item does not include a new shut off arm. To remove the existing shut off arm from the old icemaker, lift it to the up position, unhook it from the fill cup bearing, and pull it out of the module.
Refrigerator or freezer lower door closing cam. A new screw is needed to mount the cam. Consider lubricating the cam during installation.
Refrigerator meat drawer with molded handle and clear body.
Ice container, no auger parts
Refrigerator/freezer temperature control thermostat. Temperature issues can be caused by this thermostat.
Refrigerator defrost thermostat. The thermostat clips onto the evaporator. If the refrigerator does not defrost both the thermostat and heater can be tested to determine which part is at fault.
Refrigerator defrost timer kit. This timer is designed for continuous or cumulative run defrost systems. Turn the dial on the timer clockwise to advance it into and out of defrost.
Light bulb, 10 watt. Small screw in base
Door closing cam kit for bottom of refrigerator/freezer door hinges. This closing cam enables the door to close on its own. Consider lubricating the cam during installation.
Refrigerator water inlet valve kit. This valve controls the flow of water to the icemaker and water dispenser.
Ice maker shut off arm
Icemaker water fill tube with compression nut. Approximately 9 1/2 inches long. Can be cut to match the length of the original tube.
Black appliance touch-up paint.