Dryer gas burner valve solenoid set. If the dryer does not heat or heats intermittently the coils could be defective. To test, watch the burner and if the igniter glows for a while and then shuts off...
Dryer igniter kit. This igniter will replace both round and flat style igniters. The kit includes the bracket, wire nuts and mounting screw. Be aware the igniter is very fragile and should be handled...
Gas dryer sensor for igniter and flame. The sensor is located across from the gas igniter at the dryer’s burner assembly. This flame sensor should be closed for continuity at room temperature. Check...
Gas burner orifice, Natural gas #42
Gas valve leak limiter, Natural gas. *Do not adjust factory set nozzle under the limiter.
Screw with plastic washer 8-18 x 1/2
Gas line. 4' stainless gas dryer connector, (1) 3/8" and (1) 1/2" fitting, (1) extra 3/4" fitting, pipe thread sealant, leak test solution, and installation instructions.
Screw, 10-16 X 1/2
Dryer gas valve conversion kit from Natural gas to LP (liquid propane) & Butane.
Dryer gas valve assembly with solenoids & Natural gas orifice.