Refrigerator or freezer lower door closing cam. A new screw is needed to mount the cam. Consider lubricating the cam during installation.
Refrigerator defrost timer kit. This timer is designed for continuous or cumulative run defrost systems. Turn the dial on the timer clockwise to advance it into and out of defrost.
Refrigerator water inlet valve kit. This valve controls the flow of water to the icemaker and water dispenser.
Door closing cam kit for bottom of refrigerator/freezer door hinges. This closing cam enables the door to close on its own. Consider lubricating the cam during installation.
37 in. vacuum cleaner attachment for condenser and dryer cleaning - This vacuum cleaner attachment will help to clean dust and lint build-up in and around your refrigerator condenser coils underneath the refrigerator and dryer lint in the area where the lint filter is inserted. Fits 1-1/4 in. vacuum
Refrigerator icemaker control module and motor assembly. Located under the white cover of icemaker and controls ice ejector bar, heater and water inlet valve for the icemaker. If the icemaker is not making ice or making too much ice the model may be defective.
Icemaker water fill tube with compression nut. Approximately 9 1/2 inches long. Can be cut to match the length of the original tube.
1/4 inch plastic water line kit, approximately 72 inches. Tubing will need to be cut to match existing length.