Refrigerator icemaker. This item does not include a new shut off arm. To remove the existing shut off arm from the old icemaker, lift it to the up position, unhook it from the fill cup bearing, and pull it out of the module.
Refrigerator or freezer lower door closing cam. A new screw is needed to mount the cam. Consider lubricating the cam during installation.
White touch-up paint. .6 oz.
2 Terminal door switch
Refrigerator defrost timer kit. This timer is designed for continuous or cumulative run defrost systems. Turn the dial on the timer clockwise to advance it into and out of defrost.
Refrigerator water inlet valve kit. This valve controls the flow of water to the icemaker and water dispenser.
Spray paint, white, 12 ounces
Door closing cam kit for bottom of refrigerator/freezer door hinges. This closing cam enables the door to close on its own. Consider lubricating the cam during installation.
Black appliance touch-up paint.
Icemaker water fill tube with compression nut. Approximately 9 1/2 inches long. Can be cut to match the length of the original tube.
All-purpose silicon grease, ½ oz. Not food grade.
Spray paint, superior black, 12 ounces
Silicone rubber adhesive and sealant for felt seals, door gaskets and more. 2 ounces
Three terminal fan/light door switch
1/4 inch plastic water line kit, approximately 72 inches. Tubing will need to be cut to match existing length.