Kenmore Refrigerator Model 106.6698201 Parts

Refrigerator icemaker. This item does not include a new shut off arm. To remove the existing shut off arm from the old icemaker, lift it to the up position, unhook it from the fill cup bearing, and pull it out of the module.

White touch-up paint. .6 oz.

2 Terminal door switch

Refrigerator defrost timer kit. This timer is designed for continuous or cumulative run defrost systems. Turn the dial on the timer clockwise to advance it into and out of defrost.

Screw

Spray paint, white, 12 ounces

Black appliance touch-up paint.

All-purpose silicon grease, ½ oz. Not food grade.

Spray paint, superior black, 12 ounces

Silicone rubber adhesive and sealant for felt seals, door gaskets and more. 2 ounces

1/4 inch plastic water line kit, approximately 72 inches. Tubing will need to be cut to match existing length.

37 in. vacuum cleaner attachment for condenser and dryer cleaning - This vacuum cleaner attachment will help to clean dust and lint build-up in and around your refrigerator condenser coils underneath the refrigerator and dryer lint in the area where the lint filter is inserted. Fits 1-1/4 in. vacuum

Washer, door hinge. 3/4 in OD. 3/8 in ID.

Screw 8-18 x 1/2

Refrigerator water inlet valve kit. The new part may appear different from the original. It features a new quick connect tube fitting. Cut retaining nut off of existing plastic water line and gently push it into the new valve. To remove, depress the ring that the tube slides into.