Refrigerator icemaker. This item does not include a new shut off arm. To remove the existing shut off arm from the old icemaker, lift it to the up position, unhook it from the fill cup bearing, and pull it out of the module.
White touch-up paint. .6 oz.
Refrigerator defrost timer kit. This timer is designed for continuous or cumulative run defrost systems. Turn the dial on the timer clockwise to advance it into and out of defrost.
Compressor run capacitor
Black appliance touch-up paint.
Spray paint, white, 12 ounces
Refrigerator icemaker control module and motor assembly. Located under the white cover of icemaker and controls ice ejector bar, heater and water inlet valve for the icemaker. If the icemaker is not making ice or making too much ice the model may be defective.
Refrigerator evaporator fan motor with blade. No LONGER comes with brackets. Must resuse old brackets. Instructions can be found on servicematters.com with part# W11500157.
Icemaker water fill tube with compression nut. Approximately 9 1/2 inches long. Can be cut to match the length of the original tube.
All-purpose silicon grease, ½ oz. Not food grade.
1/4 inch plastic water line kit, approximately 72 inches. Tubing will need to be cut to match existing length.
37 in. vacuum cleaner attachment for condenser and dryer cleaning - This vacuum cleaner attachment will help to clean dust and lint build-up in and around your refrigerator condenser coils underneath the refrigerator and dryer lint in the area where the lint filter is inserted. Fits 1-1/4 in. vacuum
Shelf support kit, 12 piece. Includes (4) wall supports and (4) shelf supports, (2) wall mounting studs and (2) screws.
Door stop bracket