Refrigerator icemaker. This item does not include a new shut off arm. To remove the existing shut off arm from the old icemaker, lift it to the up position, unhook it from the fill cup bearing, and pull it out of the module.
Refrigerator defrost timer kit. This timer is designed for continuous or cumulative run defrost systems. Turn the dial on the timer clockwise to advance it into and out of defrost.
Icemaker water fill tube with compression nut. Approximately 9 1/2 inches long. Can be cut to match the length of the original tube.
Refrigerator evaporator fan motor with blade. No LONGER comes with brackets. Must resuse old brackets. Instructions can be found on servicematters.com with part# W11500157.
1/4 inch plastic water line kit, approximately 72 inches. Tubing will need to be cut to match existing length.
Shelf support kit, 12 piece. Includes (4) wall supports and (4) shelf supports, (2) wall mounting studs and (2) screws.
Refrigerator water inlet valve kit. The new part may appear different from the original. It features a new quick connect tube fitting. Cut retaining nut off of existing plastic water line and gently push it into the new valve. To remove, depress the ring that the tube slides into.