Kenmore Refrigerator Model 106.9659725 Parts

Refrigerator icemaker. This item does not include a new shut off arm. To remove the existing shut off arm from the old icemaker, lift it to the up position, unhook it from the fill cup bearing, and pull it out of the module.

White touch-up paint. .6 oz.

Refrigerator defrost timer kit. This timer is designed for continuous or cumulative run defrost systems. Turn the dial on the timer clockwise to advance it into and out of defrost.

Door switch

Refrigerator crisper pan

Compressor run capacitor

Black appliance touch-up paint.

Spray paint, white, 12 ounces

Universal in-line water filter designed to improve the taste of drinking water and the clarity of ice cubes by reducing contaminants such as lead and chlorine. Push-in fittings can be used in both copper or plastic 1/4 inch water lines. Replace filter every 6 months for optimal performance.

All-purpose silicon grease, ½ oz. Not food grade.

End cap for door bar

Refrigerator icemaker control module and motor assembly. Located under the white cover of icemaker and controls ice ejector bar, heater and water inlet valve for the icemaker. If the icemaker is not making ice or making too much ice the model may be defective.

37 in. vacuum cleaner attachment for condenser and dryer cleaning - This vacuum cleaner attachment will help to clean dust and lint build-up in and around your refrigerator condenser coils underneath the refrigerator and dryer lint in the area where the lint filter is inserted. Fits 1-1/4 in. vacuum

Refrigerator defrost drain strap kit to prevent the drain tube from freezing

Refrigerator defrost thermostat, clip-on. This defrost heater monitors the temperature of the evaporator coils and sends power to the defrost heater during the defrost cycle. If your defrost thermostat is defective, the refrigerator will not defrost.