Dryer lint trap. Proper air flow is critical to dryer operation so the filter should be cleaned before every load. Replace the filter if it has any tears or rips in it.
Dryer heating element and housing assembly. If the dryer does not heat check for a blown themal fuse or thermal cut out. Heating elements will often have a break in the coil element if defective.
Dryer high-limit thermostat, L260-70F. If the dryer overheats, this high-limit thermostat will cut off the power to the heating element. If the high-limit thermostat has blown, the dryer won't heat.
Dryer blower wheel. If the blower wheel is noisy the center hole may be stripped out or the fins may be damaged from debris getting through the lint filter.
Dryer heating element coil. This heating element provides heat to the dryer. If a heating element is defective, it may have a visible break in the coil.
Cycling thermostat, L135- 15F
Dryer timer assembly. NOTE: Timers are often misdiagnosed. Visit our Repair Help section of the website for additional repair information.
Timer assembly, washer