Briggs & Stratton in-line fuel filter. The filter screen is on the large side of the housing. The port on the large side goes to the fuel tank while the port on the small side of the housing goes to the carburetor.
Replacement Briggs & Stratton fuel line kit with clamps. 1/4 Inch inside diameter, Cut to length.
Small engine recoil starter assembly. This item includes the pulley and spring. The recoil starter engages the drive cup on the flywheel to start the engine when pulled.
Briggs & Stratton flywheel key. The flywheel key aligns the flywheel in the correct position on the crankshaft. If the engine stops suddenly due to hitting a hard object, the flywheel key shears in half to prevent damage to the engine. If the flywheel key is broken, the engine won't start.
Briggs & Stratton Spark Plug (RC12YC), Selected Engines 3/LC Gas (.020 gap)
Fuel pump. If this fuel pump is being installed on a Intek V-Twin engine originally equipped with a metal fuel pump, related item 1567967. The fuel pump supplies fuel to the carburetor while the engine is running. If the fuel pump is clogged, the engine may not start or may run rough.
Spark plug wrench designed to fit Briggs & Stratton Over Head Valve engines. Combination 13/16" on one end and 5/8" on the other.
Ignition coil. The ignition coil sends voltage to the spark plug while the engine is running. If the ignition coil is defective, the engine may not start. If your engine was built before date code 101230xx, you will need to order a new Governor Arm see Related Items below.
Small engine carburetor bowl gasket.
Small engine starter pawl (Nylon). *Sold as a set of Two.
Carburetor float bowl kit
Fuel float kit for carburetor
Pawl Friction Plate. This part does not include the screw or spring, please see related items.
Screw (19/32" Long)