Briggs and Strartton in-line fuel filter with 40 micron rating and 1/4" inlet & outlet. If the engine does not start then the fuel filter may be clogged and not allowing enough fuel to enter the carburetor.
Briggs & Stratton Original Equipment 492932S Oil Filter. Length: 2 1/4 inches. For optimum performance, we recommend changing the oil in your small engine after the first five hours of use. After that, change the oil on a yearly basis or after every 50 hours of use (whichever comes first).
Briggs & Stratton in-line fuel filter. The filter screen is on the large side of the housing. The port on the large side goes to the fuel tank while the port on the small side of the housing goes to the carburetor.
Replacement Briggs & Stratton fuel line kit with clamps. 1/4 Inch inside diameter, Cut to length.
Briggs & Stratton in-line fuel filter. If the fuel filter is clogged, it will restrict the flow of fuel to the carburetor. As a result, the engine may not start.
Briggs & Stratton flywheel key. The flywheel key aligns the flywheel in the correct position on the crankshaft. If the engine stops suddenly due to hitting a hard object, the flywheel key shears in half to prevent damage to the engine. If the flywheel key is broken, the engine won't start.
Briggs & Stratton 4-Cycle Engine Oil. (48oz Bottle)
Briggs & Stratton Lawn Mower Oil is formulated for 4-cycle air-cooled engines. For optimum performance, change the oil in your small engine after the first five hours of use and then annually, or every 50 hours of use (whichever comes first).
The ignition coil (armature) supplies voltage to the spark plug as the flywheel rotates. If the engine won’t start, the ignition coil could be defective.
Briggs & Stratton rocker cover gasket. Be sure that all surfaces are clean and dry before installing this gasket. Do not use solvents or gasket sealer on this gasket.
Carburetor float bowl. If the carburetor is leaking, one of the float bowl gaskets may be worn out.
Briggs & Stratton rocker cover gasket. Be certain that all surfaces are clean and dry before installing this gasket.
Crankcase oil seal, PTO side