Briggs & Stratton in-line fuel filter. The filter screen is on the large side of the housing. The port on the large side goes to the fuel tank while the port on the small side of the housing goes to the carburetor.
Briggs & Stratton in-line fuel filter. If the fuel filter is clogged, it will restrict the flow of fuel to the carburetor. As a result, the engine may not start.
Briggs & Stratton flywheel key. The flywheel key aligns the flywheel in the correct position on the crankshaft. If the engine stops suddenly due to hitting a hard object, the flywheel key shears in half to prevent damage to the engine. If the flywheel key is broken, the engine won't start.
Carburetor float bowl. If the carburetor is leaking, one of the float bowl gaskets may be worn out.
Briggs & Stratton starter gear (also called a pinion gear), 16-tooth, plastic. The starter gear engages the flyhweel to start the engine. If the teeth on the starter gear are worn out, the engine may not start.
Fuel Shut-off Valve, In-Line Valve. Fits 1/4 Inch inside diameter fuel line
Ignition coil (or magneto armature). The ignition coil sends voltage to the spark plug while the engine is running. If the ignition coil is defective, the engine may not start.
Air filter. If the air filter is clogged or dirty, the engine might not start, might be hard to start, or might run roughly. This filter should be replaced periodically to ensure optimal engine performance.
Fuel inlet hose connector
Spark plug boot
Seal-o ring for intake elbow
Single can of carburetor & choke cleaner-16oz. Made specifically for Briggs & Stratton engines, dissolves deposits in your carb and choke, reducing maintenance and downtime. Briggs & Stratton Original Equipment Manufacturer (OEM) parts are designed and engineered for Safety, Quality and Reliability.
Starter Gear For Use With Aluminum And Plastic Ring Gears