Chemical injection kit for pressure washer pump. Be sure to use the lowest pressure nozzle when adding chemicals to the spray.
Pressure washer thermal release valve. This valve will open to prevent excessive heat and pressure buildup in the pump.
Pressure washer high pressure hose, 25 ft. This hose can be used on pumps that produce up to 3000 PSI.
Wheel 12 x 175 1/2 hub - 5 spo
Pressure washer pump assembly. If the pressure washer is leaking water, the pump may need to be rebuilt or replaced. This pump does not include a new thermal release valve and key. You will need to reuse the old thermal release valve and drive key or purchase new ones.
Output shaft key
Filter screen,pump inlet
6-in-1 nozzle 027 red
Bungee cord & bead assembly
Siphon tube 350 mm