Drive Clutch Kit. This kit has 6 parts; a spring, housing, cam ring, basket drive gear, pulley, and nut. The pulley is driven by the drive belt and the splutch works with the mode shift actuator to operate the washplate and spin the inner basket. A worn splutch can cause spin or washplate problems.
Washer main drive belt. This belt is located under the washing machine and is used to drive the splutch pulley. It goes around the motor & splutch pulleys. Worn or broken drive belt can cause spin or washplate problems.
Affresh® Washing machine cleaner. This cleaner removes and prevents odor-causing residue in all brands of washers. To use, add one tablet to washer with no clothes and select hot water.
- Septic safe
- More effective than bleach.
- Three tablets per package.
White touch-up paint. .6 oz.
White washer lid strike assembly. The strike is what the lid lock hooks onto to lock the washing machine lid. If old strike looks different the latch may need to be replaced as well.
Washer drive block for inner tub. A worn drive block may cause the washer to spin slowly, causing the clothes to be soaked at the end of the cycle. The washer may also make a loud knocking noise at the beginning of the spin cycle.
Washing machine drain hose kit. Includes clamp. 4 feet long
Affresh® Washing Machine Tablets. Value pack of 6 tablets. Affresh Washer Cleaner tablets are designed to penetrate, dissolve and remove odor-causing residue that can occur in all washing machines.
Spray paint, white, 12 ounces
Package of two 5-foot-long Industrial Braid hoses with pre-installed washers and straight ends. It is recommended to replace washing machine inlet hoses after 5 years of use to reduce the risk of hose failure.
Drain hose extension kit *4 foot
Screw, 10-24 3/8
Washer main tub seal. Located in the center of the outer tub at the transmission basket drive shaft. If the washing machine is leaking water from above the transmission this seal is likely damaged or worn out.
Nut, right-hand thread, holds inner tub in place