Oven bake element. The terminals are male quarter inch spade connectors. The wires push onto the heating elements connectors. If the oven does not bake then the element could have burned out.
Appliance light bulb, clear 120 Volt 40 Watt Regular Base
Front glide for oven drawer. Requires (2) one for each side. For the rear glides see related parts below.
Rear glide for oven lower storage drawer.
Appliance light bulbs (2 pack).
*No longer Frosted
Terminal block kit for electric range and dryer power cords.
Range/stove surface element control switch repair kit. Compatible with a variety of models. The surface element switch sends voltage to the surface element coil. If the surface element is not heating, first test the surface element. If the element is not defective, the switch is likely at fault.
Oven light socket
Oven temperature sensor. This part may be different than your original. Instructions are included to help with the repair. See below for a brief set of instructions
Paint, touch-up, white
Oven bottom insulation
Oven broiler heating element
Electric range power cord kit, 4 foot 40 Amp 3 wire w/open eyelets & strain relief