Briggs & Stratton Lawn Mower Model 40H777-0241-E1 Parts
Featured parts for Briggs & Stratton Lawn Mower
Replacement Briggs & Stratton fuel line kit with clamps. 1/4 Inch inside diameter, Cut to length.
Briggs & Stratton flywheel key. The flywheel key aligns the flywheel in the correct position on the crankshaft. If the engine stops suddenly due to hitting a hard object, the flywheel key shears in half to prevent damage to the engine. If the flywheel key is broken, the engine won't start.
Spark plug wrench designed to fit Briggs & Stratton Over Head Valve engines. Combination 13/16" on one end and 5/8" on the other.
Briggs & Stratton exhaust push rod, steel.
Crankcase oil seal, PTO side
Briggs & Stratton starter gear (also called a pinion gear), 16-tooth, plastic. The starter gear engages the flyhweel to start the engine. If the teeth on the starter gear are worn out, the engine may not start.
Push rod for intake valve.
Briggs & Stratton rocker cover gasket. Be certain that all surfaces are clean and dry before installing this gasket.
Ignition coil
Spark plug boot
Air filter assembly
Gasket-crankcase kit
Briggs & Stratton voltage regulator. The voltage regulator sends the proper amount of voltage from the alternator to the battery to keep the battery charged. If the voltage regulator is defective, the battery may keep draining quickly.
Screw (19/32" Long)
Air filter pre-cleaner
Start doing it yourself with the confidence that comes with 100+ years of experience. We've got millions of parts, hundreds of brands, and thousands of step-by-step videos— everything you need to find it, fix it and finish the job right.
