Washer drive belt. If this belt is broken, the washer will not spin or agitate.
Washing machine main tub seal assembly. If the washer leaks then the tub seal may be bad.
Water inlet valve. The water inlet valve opens to allow hot, cold or warm water to enter the washing machine. If the water inlet valve is defective, the washer may fill slowly or not fill at all.
Drain hose with 90 degree elbow. 90 inches (7-1/2 feet) long
Upper spin bearing
Screw, pan head
Capacitor, washer motor 110 volt 233-280 mfd.
Hose, pump to tub
Washing machine drain pump assembly. The drain pump pushes water through the drain hose during the drain cycle. If the drain pump is clogged, damaged, or defective, the washer won't drain properly.
Agitator drive block. If the drive block wears out the washers agitator will not work properly and may also make be noisy during operation.
Long vertical spring (paint on spring)
Power cord assembly