Washing machine drive belt. 51 1/8" long and 3/8" wide. Medium v- shaped. If the motor runs, but the washer won't agitate, spin, or drain, the drive belt is likely broken or worn out.
Washing machine lid hinge pin, male end if you also need the matching female end see related parts below.
5-foot-long rubber fill hose for washing machines. Used for hot or cold water.
Washing machine drain pump assembly. If the drain pump is clogged, damaged, or defective, the washer won't drain properly. This drain pump has been updated by the manufacturer. It no longer uses a mounting plate -- instead, the pump mounts directly to base of the washer.
Snubber ring, *Note: Brake tool for snubber ring no longer available from the manufacturer.
Washing machine transmission pulley (or drive pulley). Includes pulley. thrust washer, and bearing kit. If the washer's bearing is worn out, the washer may spin slowly or may not spin at all.
Suspension spring, set of 6
Washing machine drive motor with 2 speeds and 1/2 horsepower. The motor drives the main transmission pulley and drain pump.
Flexible washing machine drain hose from outer tub to the pump.
Tub seal and bearing kit *Call to verify correct kit for model/serial
Washer lid switch with actuator, bracket, and wires