Washing machine lid hinge pin retainer pins are in the related items below
Washing machine drive belt. 51 1/8" long and 3/8" wide. Medium v- shaped. If the motor runs, but the washer won't agitate, spin, or drain, the drive belt is likely broken or worn out.
Washing machine lid hinge pin, male end if you also need the matching female end see related parts below.
5-foot-long rubber fill hose for washing machines. Used for hot or cold water.
Washer suspension spring. The suspension springs help to absorb the movements of the washer tub. If a suspension spring breaks, the tub will become unbalanced and will vibrate or shake during operation.
Washing machine drain pump assembly. If the drain pump is clogged, damaged, or defective, the washer won't drain properly. This drain pump has been updated by the manufacturer. It no longer uses a mounting plate -- instead, the pump mounts directly to base of the washer.
Snubber ring, *Note: Brake tool for snubber ring no longer available from the manufacturer.
Washing machine drain pump assembly. This pump is driven by the main drive belt that also drives the transmission pulley. If the washer does not drain the pump could be locked up or a small object may be clogging it. Also a small leak in front of the washer could be caused by a defective pump.
Washing machine transmission pulley (or drive pulley). Includes pulley. thrust washer, and bearing kit. If the washer's bearing is worn out, the washer may spin slowly or may not spin at all.
Strainer, washer inlet valve
Washing machine drive motor with 2 speeds and 1/2 horsepower. The motor drives the main transmission pulley and drain pump.
Suspension spring, set of 6