Bosch Dishwasher Model SHV45M03UC-48 Parts

Flip tine clip for lower dishrack, platinum. Holds 2 flip tines to rack.

Dishwasher door seal. If the door is leaking then the door seal may be defective.

Dishwasher lower dishrack wheel (or roller). This roller enables the dishrack to move in and out of the dishwasher. Because these rollers generally wear out at the same time, we recommend replacing them in pairs.

Dishwasher drain pump. If the water does not drain from the dishwasher then the drain pump may be clogged, damaged, or defective. *You may need to order the related wire connector to install.

Lower door seal. Helps to keep water from leaking between the bottom of the door and the tank

Dishwasher mounting bracket. *Set of 2

Dishwasher water inlet valve. The water inlet valve supplies water to the dishwasher. If the water inlet valve is defective, the dishwasher may underfill or not fill at all.

Tine clip kit (also called a bearing) for dishwasher dishrack. Includes (2) bearings (2) sleeves and (4) tine clips.

Dishwasher circulation pump and motor assembly. If the dishwasher does not wash properly then the wash impeller could be worn or the motor could be defective.

Dishwasher detergent and rinse aid dispenser. If detergent dispenser does not open or dispense the detergent or rinse aid properly then dispenser will need to be replaced.

Door latch

Microfilter basket assembly. Filters the water before going thru the pumps. Removed and installs easily by hand.

Dishwasher detergent door with seal.

Dishwasher drain hose assembly.

Dishwasher flow-through water heater with turbidity sensor and thermistor. If the dishwasher isn't heating the water, then the heating element may have failed.